VXI

02300530-01
C-Size VXI Mainframe - 4 Slots
- 4-slot mainframe for VXI plug-in modules
- Provides cooling, power, digital communication interface bus

04000044-01
Universal Power Meter
- Dual channel power meter, peak or CW operation
- > 150 readings per second
- Frequency range:  10 MHz to 40 GHz, sensor dependent
- Power dynamic range:  90 dB, sensor dependent
- 1 mW power reference 

08020005-01
Bus Simulator
TPS compatible replacement instrument for obsolete ESTS instrument Bus Simulator
- 2 channels, transformer coupled
- 32 20-bit words per message
- Manchester Bi-phase compatible
- 40 V (p-p) max. 

08020006-01
Counter/Timer/Digitizer
TPS compatible replacement instrument for obsolete ESTS instrument Counter/Timer/Digitizer
- 2 channels
- DC to > 100 MHz BW
- Better than ± 25 mV sensitivity
- > ± 7 V into 50 Ohm
- > ± 100 V into 1 M Ohm 

08020007-01
High Density (TTL-I/O) Card
TPS compatible replacement instrument for obsolete ESTS instrument High Density (TTL-I/O) Card
- 256 TTL compatible pins
- Source/Sink 24 mA max.
- Programmable in groups of 8 

08020008-01
Arbitrary Function Generator
TPS compatible replacement instrument for obsolete ESTS instrument Arbitrary Function Generator
- 2 channels
- Arbitrary plus 6 built-in waveforms
- ± 7 Vdc to > 25 MHz 

08020009-01
Signal Distribution System
TPS compatible replacement instrument for obsolete ESTS instrument Signal Distribution System
- 72 user ports to > 100 MHz
- 10 internal buses
- On-board programmable resistance 

08020010-01
Form C Relay Card
TPS compatible replacement instrument for obsolete ESTS instrument Form C Relay Card
- 32 SPDT Form C relays
- 4 A continuous max.
- Closed contact resistance < 1.0 Ohm 

08020015-01
Scanner Multiplexer
TPS compatible replacement instrument for obsolete ESTS instrument Scanner Multiplexer
- 96 2-wire paths
- 48 4-wire paths
- 1 A max. current 

08020016-01
Power Meter
TPS compatible replacement instrument for obsolete ESTS instrument Power Meter
- CW and peak sensors
- Frequency range:  10 MHz to 18 GHz
- Amplitude range:  -70 to + 20 dBm 

08020017-01
High Speed DWG
TPS compatible replacement instrument for obsolete ESTS instrument High Speed DWG
- 96 stimulus/response pins or 48 bi-directional pins @ > 20 MHz
- Multi-mode operation
- LASAR TAP interface
- > 1 M memory depth 

08020019-01
RF Generator #2
TPS compatible replacement instrument for obsolete ESTS instrument RF Generator #2
- 10 MHz to 18 GHz with 1 Hz resolution
- +12 to -90 dBm with 0.1 dB resolution
- AM, FM, and PM modulation 

08020021-01
RF Counter
TPS compatible replacement instrument for obsolete ESTS instrument RF Counter
- 100 Hz to 18 GHz frequency range (CW and peak)
- -14 to +7 dBm
- 3 discrete bands 

08020022-01
DAC Card
TPS compatible replacement instrument for obsolete ESTS instrument DAC Card
- 12 channels (single-ended)
- ± 16.2 Vdc
- 16-bit resolution 

08020023-01
Synchro/Resolver
TPS Compatible replacement instrument for obsolete ESTS instrument Synchro/Resolver
- 6 channels; 3 input, 3 output
- Frequency reference:  360 Hz to 5 KHz
- Angular range:  0° to 359.9° 

08020100-10
Advanced Video System
TPS compatible replacement instrument for obsolete ESTS instrument Advanced Video System
- 9 channels; 6 output, 3 input
- Frequency range:  1 Hz to 50 MHz
- Pixel time:  > 1/frequency
- Pixel depth:  > 4 bits 

08020101-10
H009
TPS compatible replacement instrument for obsolete ESTS instrument H009
- 1 channel, dual-port relay controlled
- Manchester Bi-phase compatible
- 40 V (p-p) max. 

08020103-10
Rubidium Reference
TPS compatible replacement instrument for obsolete ESTS instrument Rubidium Reference
- 10 MHz (< ± 0.02 Hz)
- 1 to 2 V (p-p) into 50 Ohm 

08020104-10
Digital Multimeter
TPS compatible replacement instrument for obsolete ESTS instrument Digital Multimeter
- 6.5 digits
- 200 V peak max. input
- Accuracies specified through 1 MHz

92103848-01
Pattern Pod
- Extends measurement accuracy to a DUT located up to 2 meters from the
front panel
- Each pod buffers the input and output signals for 2 of the 4 pattern
I/O modules
- 2 pods are required for each pattern I/O module
- Provides input for tri-state control and external clock

92103849-01
C-Size Mainframe with Command Module
- 13-slot mainframe for VXI plug-in modules
- Handles advanced command interpreter
- Provides cooling, power, digital communication interface bus
- Expanded memory options available

92103850-01
160 MHz Timing I/O Module
- Provides control signals for the DUT and timing for the sequence of
patterns that are generated or recorded by the pattern I/O modules
- Provides 12 pattern clocks
- 2-slot width

92103851-01
20 MHz Pattern I/O Module
- 32 I/O pins (4 ports of 8 bits each)
- Maximum 20 MHz pattern rate using an external clock
- 64K segmentable pattern depth
- Each port can output, record, or perform a real-time compare
- Programmatic or triggered tri-state on the fly
- 1-slot width

92103852-01
Terminating 20 MHz Pattern I/O Module
- 32 I/O pins (4 ports of 8 bits each)
- Maximum 20 MHz pattern rate using an external clock
- 64K segmentable pattern depth
- Each port can output, record, or perform a real-time compare
- Programmatic or triggered tri-state on the fly
- Terminates the pattern clock lines
- 1-slot width

92103855-03
Synchro/Resolver Simulator and Indicator
- Independent digital to synchro channel and synchro to digital channel
- Dynamic rate and directions
- Programmable
- Reference Input: 26 or 115 V rms
- Signal I/O: 11.8, 26, and 90 V L-L
- 1-slot width

92103858-03
Stimulus/Measurement Matrix Module 

92103863-01
Arbitrary Function Generator

92103897-01
Timing Pod
- Extends measurement accuracy to a DUT located up to 2 meters from
the front panel
- An active device which improves the ability to drive DUT inputs and
minimizes loading on DUT outputs
- Buffers the 8 control signals out to the DUT as well as the 10 ‘Q’ lines,
a ready line, and a trigger line into the timing I/O module

92103986-01
VXI Mainframe Command Module
- C-1
- Message-based commander
- SCPI translator for register-based modules
- P/O 92103849-01

92103986-03
VXI Mainframe Command Module with Expanded Memory
- C-1
- Message-based commander
- SCPI translator for register-based modules
- Expanded memory

92103987-01
VXI Mainframe
- High power VXI mainframe
- C-size
- 13-slot
- P/O 92103849-01

92105071-01
VXI Quad Serial Module
- An intelligent serial interface capable of polling and analyzing received
data in real time
- 4 separate and independent RS-232/RS-422/RS-485 serial interface
channels/ports
- 4 independently programmable channels capable of simultaneous
data transfer
- Baud rates from 50 to 115 Kbits/s per channel
- Buffer Partitions:
- Transmit: 32 Kbytes/channel
- Receive: 64 Kbytes/channel
- 1-slot width

92105232-01
MXI-3 VXI Bus Interface Kit 

92105233-03
VXI-MXI-3 Command Module

93000CCA-10
BRAT Switch Cards (BRAT 105)

93000068-01
QUAD 8-Bit Digital Input/Output Latch
- 4 independently programmable 8-bit ports
- TTL compatible I/O and control lines for GPIO handshake modes
- Block mode transfer - 325 Kbytes/s
- 1-slot width

93000074-01
64-Channel Relay Multiplexer
- 64 2-wire, 32 3-wire, 32 4-wire, or 128 single-ended latching relay
channels
- Reconfigurable. For example:
- eight 1 x 8 multiplexers
- four 1 x 8 and two 1 x 16 multiplexers
- two 1 x 32 multiplexers
- one 1 x 64 multiplexer
- 128 single-ended channels
- 1-slot width

93000075-01
Relay Matrix
- 4 x 64, 8 x 32, or 16 x 16 2-wire switching matrix
- Expand row and columns to make larger matrices with an optional cable
or special expansion terminal module
- 1-slot width

93000075-03
Relay Matrix 4 x 64
- 4 x 64, 8 x 32, or 16 x 16 2-wire switching matrix
- Expand row and columns to make larger matrices with an optional cable
or special expansion terminal module
- 1-slot width

93000076-01
RF Multiplexer
- Six 1 x 4 multiplexers
- 50 Ohm or 75 Ohm characteristic impedance
- Switch signals up to 3 GHz
- 1-slot width

93000077-01
6 1/2-Digit Digital Multimeter
- Functions: DCV, ACV, 2- and 4-wire Ohms, frequency, and period
- 1-slot width

93000078-01
High-Performance Universal Counter
- 200 MHz frequency range
- 9 digits/s resolution
- Optional high frequency channel
- 2 ns time-interval resolution (200 ps with averaging)
- 1-slot width

93000079-01
1-GSa/s Digitizing Oscilloscope
- 2 channels, 1 GSa/s max. sample rate
- 250 MHz bandwidth, single-shot or repetitive
- 1-slot width

93000080-01
Arbitrary Function Generator
- 13-bit resolution, 40 MSa/s
- 256K sample memory with sequencer (custom waveforms)
- Phase continuous frequency hopping
- Linear or logarithmic frequency sweeping
- 1-slot width

93000081-01
21 MHz Synthesized Function/Sweep Generator
- Sine, square, triangle, negative and positive ramps, DC, and
TTL clock waveforms
- Amplitude and phase modulation
- Multi-interval sweep and multi-marker mode
- 2-slot width

93000157-01
64-Channel Scanning A/D Converter
- 16-bit resolution, 100 KSa/s max. sample rate
- Input options: DC volts, temperature, resistance, and strain gauge
- 1-slot width

93000326-01
Dynamic Digital (32 Pin Groups)
- 32 I/O pins (4 ports of 8 bits each)
- 20 MHz pattern rate
- 64K segmentable pattern depth
- Each port can output, record, or perform a real-time compare
- TTL/CMOS/ECL compatible logic
- 2 associated pods

93000326-03
TTL Assembly, Dynamic Digital (32 Pin Groups)
- TTL compatible logic
- 32 I/O pins

93000326-05
CMOS Assembly, Dynamic Digital (32 Pin Groups)
- CMOS compatible
- 32 I/O pins

93000326-07
ECL Assembly, Dynamic Digital (32 Pin Groups)
- ECL compatible logic
- 32 I/O pins

93000326-09
Programmable Assembly, Dynamic Digital (32 Pin Groups)
- ECL/TTL/CMOS compatible logic levels
- 32 I/O pins

93000506-01
32-Channel, 5 A, Form C Switch
- Nonlatching relays (SPDT)
- Space available for adding varistors for greater relay protection when
switching inductive loads
- 1-slot width

93000570-01
Digital Functional Test
- 160 MHz timing module
- 32 I/O pins (reference P/N 93000326-01)
- 2-slot width
- 1 associated timing pod

95000014-01
Peak, CW Power Meter
- 10 MHz to 18 GHz
- Dual channel
- -70 to +20 dBm (CW sensor)
- -20 to +20 dBm, peak
- -30 to +20 dBm, CW (pulse sensor)
- 1-slot width

95000015-01
Frequency Counter
- 100 Hz to 20 GHz frequency coverage (expanded coverage available)
- -15 dBm to +7 dBm input power range
- Pulse and CW frequency measurements
- Pulse parameter measurements performed
- 1-slot width

95000016-01
Rubidium Frequency Standard
- 10 MHz
- 1 V rms into 50 Ohms
- 5 x 10
-11 initial accuracy
- 5 x 10
-11/month aging
- Multiple outputs for system synchronization
- 1-slot width

95000019-03
MIL-STD-1553A/B Bus Analyzer Simulator
- Operating modes:
- Bus controller
- Multiple RT
- Bus monitor
- Programmable response time
- Dual bus
- Programmable parameters:
- Response time
- Message rate
- Amplitude
- Error injection
- 1-slot width

95000020-01
VXI Programmable Loads
- 10 A, 75 V, 50 W
- Constant current
- Constant resistance
- Short circuit
- Pulsed loading
- 1-slot width

95000022-01
VXI Dual-Channel Pulse Generator
- 10 Hz to 100 MHz
- Programmable pulse widths or duty cycles
- 24 V p-p programmable amplitude
- Period: 3.3 ns to 100 ms
- Delay: 0 ns to period
- 1-slot width

95000023-01
VXI Programmable Level Digital I/O Pins
- Output HI level: -5 V to +15 V
- Output LO level: +5 V to -15 V
- Input HI threshold: -5 V to +15 V
- Input LO threshold: +5 V to -15 V
- 192 bidirectional 3-state pins
- May be synchronized to yield up to 1152 pin digital interface
- Memory depth: 32K
- Speed: 25 MHz
- 1-slot width

95000024-01
RF Control Module
- Interface to VXI frequency synthesizers
- Controls from 1 to 8 modules
- Contains 10 MHz time base
- 1-slot width

95000025-01
Microwave Frequency Synthesizer
- 2 to 12 GHz
- -90 to +10 dBm
- Amplitude, frequency, and pulse modulation
- Interfaces with downconverter to extend frequency range down to 10 MHz
- 2-slot width

95000026-01
Downconverter Adapter
- 10 MHz to 2 GHz
- -90 to +5 dBm
- Amplitude, frequency, and pulse modulation
- Interfaces with microwave frequency synthesizer to provide greater
frequency coverage
- 1-slot width

95000027-01
VXI RF Multiplexer Module
- Configurable: 16-1 x 4, 8-1 x 9, 4-1 x 19, 2-1 x 39, 1-1 x 79
- 200 Vdc, 0.5 A, 10 W per channel
- Bandwidth (-3 dB): 200 MHz
- SWR (50 Ohm): < 1.3:1 at 100 MHz
- 1-slot width

95000028-01
VXI Power Switching Module
- 20 DPST relays
- 350 Vac, 8 A, 240 W per channel
- 1-slot width

95000029-01
VXI Open Collector Driver Module
- 96 channels at 32 Vdc, 200 mA per channel
- 1-slot width

95000031-01
Enhanced VXI Dual-Channel Pulse Generator
- 10 Hz to 300 MHz  
- Programmable pulse widths or duty cycles
- 24 V p-p programmable amplitude
- Period: 3.3 ns to 100 ms
- Delay: 0 ns to period
- 1-slot width

95000035-01
RF/Microwave VXI Chassis
- Heavily shielded
- Low noise linear power supply
- 35 watts per slot

95000038-01
VXI Expansion Rack
Provides the ability to enhance an existing system with an expansion rack which contains the HP E1401A high power mainframe and the HP E1406A command module. The VXI expansion rack can accommodate two additional C-size VXI mainframes for a total of up to three VXI mainframes in the expansion rack.

95000048-01
20 GHz Synthesized Signal Generator
- 0.01 to 20 GHz frequency range
- 1 Hz resolution
- +13 to -90 dBm leveled output power
- 0.1 dB power resolution
- AM, pulse, and complex modulation
- 3-slot width

95000049-01
Synchro/Resolver Simulator and Indicator
- 3 independent digital to synchro channels and synchro to digital channels
(custom configurable)
- Dynamic rate and directions
- 1-slot width

95000050-01
ARINC-429 Test/Simulation and Monitor Card
- Up to 10 ARINC-429 channels
- Variable Tx amplitude control per Tx channel
- Programmable rise/fall time per Tx channel
- Programmable Tx inter-word gap (sync) time
- 32K x 8 true dual-port RAM (8- and 16-bit transfers)
- User definable Tx and Rcv buffer sizes per channel
- 2 modes of receiver/monitor data storage modes
(Sequential and Lookup Table)
- ARINC filter table
- Error injection (per block)
- Error detection (per ARINC word)
- Interrupt and polling capabilities in all modes
- 1-slot width

95000051-01
ARINC-629 (DATAC) Simulation and Test Board
- 16/8-bit data bus
- Time tagging of messages
- ARINC-629 compatible Serial Interface Module (SIM) (standard)
- Open collector TTL (standard)
- 128K x 16 double buffered data ram (dual ported)
- 1-slot width

95650020-10
Driver Simulator
- 2-axis closed loop actuator control
- 3 open collector power switches (≤ 3 A @ 32 Vdc)
- 1-slot width

95650053-01
VXI Variable Gain Amplifier
- Provides 4 wide-band isolated variable gain amplifier channels with
wraparound self test
- Each channel can deliver 5 watts of output power
- Gain is programmable
- Relays supplied to enable user to bypass any channel
- Accepts floating point, decimal, integer, string, or scientific notation
- Complies with Rev.1.3
- Meets IEEE-488.2

95650095-10
Stimulus MUX IAU CCA
- Interfaces with HP1466E VXI switch
- Allows customization of HP1466E to provide the following multiplex
configurations:
- 2 x 128
- 4 x 64
- 8 x 32

95650095-30
Stimulus MUX IAU CCA
- Interfaces with HP1466E VXI switch
- Allows customization of HP1466E to provide the following multiplex
configurations:
- 2 x 128
- 4 x 64
- 8 x 32 

95650095-50
Stimulus MUX IAU CCA
- Interfaces with HP1466E VXI switch
- Allows customization of HP1466E to provide the following multiplex
configurations:
- 2 x 128
- 4 x 64
- 8 x 32

95650585-10
Digital Driver Simulator Module
- 2-axis, analog closed-loop motor control
- 3 high-side, open-collector general purpose drivers capable of delivering
up to 3 amperes per driver
- 2 switched, high-side open-collector actuator drivers capable of delivering
1 ampere per driver
- Analog (LVDT) positional feedback inputs

95650700-01
Digital Driver Simulator Module
- 2-axis, closed-loop actuator control
- Digital Signal Processor (DSP) with adaptive algorithm control
- Single-slot (1U), C-size, VXI module featuring register-based
control (A32/D16)
- 3 open-drain general purpose MOSFET drivers with low RDS(on)
- Analog (LVDT) or digital encoder position sensor feedback
- Field Programmable Gate Array (FPGA) with option for user expansion
capability

96000001-01
50 MHz Digital Interface Timing Module
- Full 50 MHz data rate
- Store up to 32 different test programs
- Dual-Processor architecture
- 64K vectors
- Maximum of 20 modules per controller
- Multilevel triggering for logic analysis
- Message based commands for easy test program development
- A32/D32 binary transfer for high speed down loads
- 1-slot width

96000001-03
50 MHz Timing/Control Module
- Full 50 MHz data rate
- Store up to 32 different test programs
- Dual-Processor architecture
- 64K vectors
- Maximum of 20 modules per controller
- Multilevel triggering for logic analysis
- A32/D32 binary transfer for high speed down loads
- SR5510 with Option 005

96000002-01
50 MHz TTL/CMOS/ECL Pattern Module
- 32 input and 32 output pins per module
- Full 50 MHz data rate
- 64K vectors per channel
- RAM-backed and algorithmic pattern generation
- NRZ, RZ, RONE, RTC, and RI output data formats supported
- 16 stimulus timing generators per module
- 2 response generators per module
- 100 ps edge placement resolution
- 1-slot width

96000005-01
32-Bit Array Processor
- Dual TMS320C30 processors
- 33 MFLOP peak rate
- Signal processing and imaging libraries
- 2 to 8 Mbytes on board memory
- VME 32-bit DMA master and shared memory interface
- 1-slot width

96000007-03
50 MHz Variable I/O Module, 504 Configured, Dual Termination
- 16 input and 16 output pins per module
- Full 50 MHz data rate
- 64K vectors per channel
- RAM-backed and algorithmic pattern generation
- NRZ, RZ, RONE, RTC, and RI output data formats supported
- 8 stimulus timing generators per module
- 2 response generators per module
- 100 ps edge placement resolution
- 1-slot width

96000012-01
32-Channel Differential ECL I/O Module
- 32 input and 32 output pins per module
- Full 50 MHz data rate
- 64K vectors per channel
- RAM-backed and algorithmic pattern generation
- 16 stimulus timing generators per module
- 2 response generators per module
- 100 ps edge placement resolution

96000013-01
Timing Module Extension Card (Dual)
- This unit increases the number of 5000 Series VXI cards the 5010 Timing
Module can control

96000013-03
Timing Module Extension Card (Single)
- This unit increases the number of 5000 Series VXI cards the 5010 Timing
Module can control

96000014-01
High Power Mainframe - 6 Slots
- 6-slot mainframe for VXI plug-in modules
- Handles advanced command interpreter
- Provides cooling, power, digital communication interface bus

96000014-03
High Power Mainframe - 13 Slots
- 13-slot mainframe for VXI plug-in modules
- Handles advanced command interpreter
- Provides cooling, power, digital communication interface bus

96000016-01
VXI-MXI-2 Kit (With Cable)
- Standard MXI-2 interface kit. Provides a slot 0 MXI-2 controller and
PCI card controller, and associated software

96000016-03 (Without Cable)
VXI-MXI-2 Kit
- Standard MXI-2 interface kit. Provides a slot 0 MXI-2 controller and
PCI card controller, and associated software

96000017-01
VXI-MXI-2 Extender
- Standard MXI-2 interface extender. Provides a slot 0 controller

96000017-03
VXI-MXI-3 Extender
- Standard MXI-3 interface extender. Provides a slot 0 controller

96000137-10
RFI ECL Module I/O CCA

98000100-30
Programmable Video Generator and Analyzer Module (A-10)
- Stroke Video (XYZ) functions integrated into a single-slot, C-sized,
register-based VXI instrument
- ± 20 V differential outputs (line to line) into 75 Ohm with 16-bit resolution
- Automatic run time alignment accurate to 0.05% ± 2.5 mV
- Sophisticated control structure provides the ability to simulate dynamic
and interactive displays
- Standard Stroke Video (XYZ) programming simplified with predefined
macros
- User programmable timing pulses for internal/external synchronization
- Plug and Play compatible
- Built-in test
- All input/output via standard connectors - MCX 75 W coax (analog) and
D-sub 62-pin (digital)
- Turn-key operation