IEEE-488

00002412-03
Electronic Load
-  Power: 4000 W
- Voltage: 400 Vdc
- Current: 600 A

01000511-01
Modulation Meter
-  Frequency range: 100 KHz to 2.5 GHz
-  Measures AM/FM/ØM
-  Measures carrier frequency, level, audio frequency, and distortion/SINAD
-  Peak, RMS, quasi-peak detection
-  Audio frequency output
-  GPIB programmable

01000513-01
Audio Analyzer
-  Frequency range: 10 Hz to 200 KHz
-  Measures frequency, distortion, SINAD, S/N
-  Measurement level of 300 µV to 300 V
-  Built-in audio source for stimulus-response applications
-  GPIB programmable

01000514-01
Signal Generator
-  Frequency range: 9 KHz to 2.51 GHz
-  Power: -140 to +13 dBm
-  Modulation: AM, FM,ØM, pulse, FSK
-  Internal modulation generator
-  GPIB programmable

01000515-01
Fast Switching Signal Generator
-  Frequency range: 1 MHz to 1600 MHz
-  Power: +3 to +13 dBm 
-  Frequency switching: 20 µs max.
-  Low phase noise
-  BCD programmable

02000136-01
RF Pulse Amplifier
-  1000 W pulse
-  Gain >/= 60 dB
-  Input power </= 10 dBm
-  Harmonics </= 60 dBC
-  30% max. duty cycle

02000136-03
Upgraded RF Pulse Amplifier
- 1000 W pulse
- Gain ≥ 60 dB
- Input power ≤ 10 dBm
- Harmonics ≤ 60 dBC
- 30% max. duty cycle

02000259-01
Programmable DC Electronic Load
-  4000 W DC load
-  Constant current mode
-  Constant voltage mode
-  Constant power mode
-  Constant resistance mode
-  500 Vdc max. voltage

02000259-03
Upgraded Programmable DC Electronic Load
- 4000 W DC load
- Constant current mode
- Constant voltage mode
- Constant power mode
- Constant resistance mode
- 500 Vdc max. voltage 

04000045-01
CW Power Sensor
- 10 MHz to 18 GHz
- -70 to +20 dBm 

04000046-01
Peak Power Sensor
- 45 MHz to 18 GHz
- -20 to +20 dBm, peak
- -30 to +20 dBm, CW 

08020003-01
RF Generator #1
TPS compatible replacement instrument for obsolete ESTS instrument RF Generator #1
- 10 MHz to 18 GHz with 1 Hz resolution
- +13 to -90 dBm with 0.1 dB resolution
- AM, FM, and PM modulation 

08020004-01
Signal Analyzer (CNTS)
TPS compatible replacement instrument for obsolete ESTS instrument Signal Analyzer (CNTS)
- Carrier frequency range:  5 MHz to 18 GHz
- +10 to -20 dBm AM noise measurement range
- +5 to +1.5 dBm FM noise measurement range 

08020011-01
DC Power Supply
TPS compatible replacement instrument for obsolete ESTS instrument DC Power Supply
- 6 channels independently programmable
- 5, 32 V max., 10 mV resolution
- 5, 6.25 A max., 10 mA resolution
- 1 ADM/DAC high-voltage slave 

08020012-01
AC Power Supply
TPS compatible replacement instrument for obsolete ESTS instrument AC Power Supply
- 4 channels independently programmable
- 4 auxiliary channels follow main
- Main output:  0 to 135 Vac
- Auxiliary output:  0 to 30.5 Vac
- Frequency range:  < 350 Hz to > 1 KHz 

08020013-01
High Voltage DC Power Supply
TPS compatible replacement instrument for obsolete ESTS instrument High Voltage DC Power Supply
- 1 channel ADM/DAC controlled
- 200 V max.
- 12 A max. 

08020014-01
Spectrum Analyzer
TPS compatible replacement instrument for obsolete ESTS instrument Spectrum Analyzer
- 30 Hz to 18 GHz
- +30 dBm to noise floor reference
- RBW 1 Hz to 2 MHz

92103573-01
Single-Phase AC Programmable Power Supply
-  AC supply 350 VA
-  Frequency:
-  Range: 0 to 5 KHz
-  Resolution: 1 Hz
-  Amplitude (350 VA max.):
-  Range: 0 to 260 Vac
-  Resolution: 0.1 Vac

92103598-01
IEEE Card
-  Standard IEEE-488.2 interface

92103598-03
IEEE Card
-  Standard IEEE-488.2 interface

92105229-01
IEEE Card Upgrade
-  Replaces existing IEEE card as a result of Windows™ upgrade
-  Includes removal of old card and installation of new card
-  Requires P/N 3105SU-1, or P/N 3105SU-2, or P/N 3105SU-3

93000069-01
A/B to C-Size Module Carrier

93000550-30
Three-Phase AC Programmable Power Supply
-  Range: 0 to 312 Vac
-  Frequency: DC to 5 KHz
-  Rack mountable
-  Power Factor Correction option available

93000550-50
Three-Phase AC Programmable Power Supply with Power Factor Correction
-  Range: 0 to 312 Vac
-  Frequency: DC to 5 KHz
-  Rack mountable
-  Input power factor corrects to better than 0.99

93001001-10
KPA Synchronizer Simulator
- Radar pulsed repetition frequency simulator and recycler

94000855-01
Microwave Signal Generator
-  Frequency:
-  Range: 10 MHz to 18 GHz
-  Resolution: 0.1 Hz
-  +10 to -120 dBm amplitude range
-  Excellent spectrum purity
-  Modulation capabilities (pulse, AM, FM)
-  Rack mountable

94000887-01
DC Power Supply Frame
-  Rack mountable
-  Can hold up to 6 DC modules, any combination (94000888-01, 94000889-01,
94000890-01, 94000891-01, 95000042-01, 95000043-01, 95000044-01,
95000045-01)

94000888-01
0 to 7 V Module for DC Power Supply
-  15 A max.
-  105 W
-  For use in 94000887-01

94000889-01
0 to 20 V Module for DC Power Supply
-  10 A max.
-  200 W
-  For use in 94000887-01

94000890-01
0 to 32 V Module for DC Power Supply
-  6.25 A max.
-  200 W
-  For use in 94000887-01

94000891-01
0 to 320 V Module for DC Power Supply
-  0.625 A max.
-  200 W
-  For use in 94000887-01

94000967-01
Vector Signal Generator
-  High-performance, versatile modulation source
-  Analog phase modulation for telemetry signals
-  BPSK, QPSK, 8PSK, 16QAM, digital modulation, and pulse
-  Direct-sequence spread spectrum modulation with chip widths to 7 ns
-  Wide-band FM: over 200 MHz p-p deviations
-  700 MHz modulation bandwidth using I/Q or vector
-  10 MHz to 3 GHz IF testing
-  Pulse modulation with 1-ns rise times
-  Coherent carrier output
-  Rack mountable

94000968-01
Vector Signal Analyzer
-  High-performance spectrum analysis
-  Advanced, optimized time-gated spectrum analysis 
-  Precision digital AM, FM, PM demodulation
-  Narrow-band spectrum speed to 60 updates/s
-  Simultaneous time and frequency measurement
-  High resolution, high accuracy time domain
-  Rack mountable

94000969-01
Agile Signal Generator
-  252 KHz to 1030 MHz frequency range
-  15 ms frequency switching
-  Stand-alone control of frequency agility
-  Specified performance while fast hopping
-  FM rates to 10 MHz, deviations to 20 MHz
-  Low spurious and phase noise
-  Rack mountable

94001241-01
IEEE Programmable Electronic Load (2.5 KW)
-  Maximum power: 2500 W continuous
-  Voltage range: 10 to 400 Vdc
-  Resistance range: V/I programmable

94001246-01
VXI Microwave Synthesizer, 10 MHz to 20 GHz
- Frequency range:  10 MHz to 20 GHz
- Output power:  -90 to +20 dBm
- AM, FM and pulse modulation
- I/Q modulation (40 MHz bandwidth) 

94001253-03
Microwave Synthesizer
- Frequency range:  10 to 18 GHz (1 MHz resolution)
- Output power:  +10 to -110 dBm (0.1 dB resolution)
- Internal/External modulations:  AM, FM, PM

94100508-01
Dual High Current AC Power Supply
-  Programmable single or 3-phase output
-  0 to 312 V rms Line to Neutral
-  26 A at 270 V per phase
-  DC or 40 Hz to 5 KHz

94100750-01
Power Distribution Unit
-  For use with Master and Slave Three-Phase Power Supplies
- Provides interconnect between Master and Slave

94100751-01
Three-Phase Power Supply (Master)
-  For use with Power Distribution Unit and Slave Three-Phase Power Supply
- Range: 0 to 312 Vac
- Frequency: DC to 50 KHz
- Rack mountable

94100752-01
Three-Phase Power Supply (Slave)
-  For use with Power Distribution Unit and Master Three-Phase Power Supply
- Range: 0 to 312 Vac
- Frequency: DC to 50 KHz
- Rack mountable

94101177-01
136-Channel Logic Analyzer
-  Channel count: 136
-  Timing analysis speed: 250 MHz
-  State analysis speed: 150 MHz
-  Memory depth: 2 M

95000010-01
Traveling Wave Tube Amplifier
-  8 to 12.4 GHz
-  40 dB minimum gain
-  +43 dBm (20 watts) minimum output power
-  Rack mountable

95000011-01
High-Performance Signal Generator
-  100 KHz to 1.0575 GHz
-  1 Hz resolution
-  -140 to +20 dBm output power
-  Phase, amplitude, frequency, and pulse modulation
-  Rack mountable

95000012-01
Spectrum Analyzer
-  100 Hz to 1.5 GHz
-  -135 to +30 dBm
-  20 ms to 1500 s sweep times
-  Rack mountable

95000013-01
Frequency Counter
-   DC to 1.3 GHz
-  100 mV to 1 V rms dynamic range
-  ±5 Vdc max.
-  Rack mountable

95000017-01
RF Network Analyzer
-  0.1 to 500 MHz
-  Integrated source
-  Full accuracy enhancement
-  Transmission and reflection measurements (amplitude and phase) performed
-  Rack mountable

95000018-03
Microwave Network Analyzer
-  50 MHz to 20 GHz
-  Integrated source
-  Full accuracy enhancement
-  Transmission and reflection measurements (amplitude and phase) performed
-  Time domain capability
-  Rack mountable
-  Frequency offset mode
-  Calibration kit

95000042-01
0 to 10 V Module for DC Power Supply
-  12 A max.
-  120 W
-  For use in 94000887-01

95000043-01
0 to 40 V Module for DC Power Supply
-  5 A max.
-  200 W
-  For use in 94000887-01

95000044-01
0 to 80 V Module for DC Power Supply
-  2.5 A max.
-  200 W
-  For use in 94000887-01

95000045-01
0 to 160 V Module for DC Power Supply
-  1.25 A max.
-  200 W
-  For use in 94000887-01

95000450-10
Auxiliary RF Signal Processor/Matrix
-  Switching and attenuation DC to 18 GHz
-  HF synthesis, low noise target generator (optional), and amplification

95000450-50
Auxiliary RF Signal Processor/Matrix
-  Switching and attenuation DC to 18 GHz
-  HF synthesis, low noise target generator, and amplification

95000524-10
Phase Noise Measurement Drawer
-  Measures phase noise at frequencies between 150 MHz (VHF) and 10.5 GHz (X band)
-  Measures AM noise at frequencies between 150 MHz and 10.5 GHz
-  Generates low noise signal outputs between 10 MHz and 10.5 GHz
-  Provides signal switching, downconversion, amplification
-  Unit is housed in a rack-mountable drawer

95001000-10
Target Generator/Dual-HF Synthesizer,
Including Virtual Spectrum Analyzer Software Utility
-  Provides stable low spurious, highly stable programmable waveforms, and triggering functions
-  Provides additional dual-HF synthesizer capability

95650134-10
Rack Mount Oscilloscope

95650138-10
Cable Tester Assembly
-  Computer controlled system
-  Tests products ranging from aircraft cables to complex black boxes
-  Provides real-time, on-line control over testing
-  Flexibility in programmable stimulus for insulation and continuity testing

95650138-30
Cable Tester Assembly 

95650153-10
Uninterruptable Power Supply

96000020-01
Programmable Electronic Load
-  Maximum power: 300 W continuous
-  Voltage range: 3 to 120 V (selectable)
-  Resistance range: 0.01 to 1 K Ohm

96000021-01
1 KW Programmable Power Supply
-  0 to 33 Vdc @ 33 A max.
-  Load, line resolution: 33 mV, 33 mA
-  Programming resolution: voltage, current: 0.03% F.S.
-  Programming accuracy:
-  voltage: ±0.05% + 0.4% of VOUT max.
-  current: ±0.01% + 0.4% of IOUT max.

96000022-01
Programmable Load Power Supply
-  60 V/60 A or 120 V/30 A 
-  Constant current mode accuracy
-  Constant low current range
-  Constant voltage mode accuracy
-  Constant resistance mode
-  Current pulse mode
-  Voltage pulse mode
-  Resistance pulse mode
-  Remote sensing

96740017-05
Peak Power Meter
-  High resolution color display
-  Front panel menu or IEEE remote operation
-  Pulsed RF measurements from -24 to +20 dBm
-  CW measurements from -34 to +20 dBm
-  Balanced diode sensing for even-order harmonic suppression
-  1 MHz sampling rate
-  1 GHz internal calibrator

96740017-07
Dual-Channel Peak Power Meter
-  CW and pulsed RF signals
-  Peak and average power
-  500 MHz to 18 GHz
-  -40 to +20 dBm (pulsed)
-  -50 to +20 dBm (CW)

96740019-01
Peak Power Sensor
-  Frequency range: 0.5 to 18 GHz
-  Power measurement: -40 to +20 dBm
-  Risetimes: < 100 ns
-  VSWR: 1.15:1

96740019-03
Peak Power Sensor
-  Frequency range: 0.5 to 18 GHz
-  Power measurement: -50 to +20 dBm
-  Risetimes: < 100 ns
-  VSWR: 1.15:1

96740021-01
Frequency Synthesizer
-  Front panel controls or BCD remote operation
-  Frequency hopping: < 1 µs
-  Frequency range: 0.01 to 4.6 GHz
-  Power output: to 10 dBm
-  Direct analog synthesis using 10 MHz source

96740021-03
Upgraded Frequency Synthesizer
-  Front panel controls or BCD remote operation
-  Frequency hopping: < 1 µs
-  Frequency range: 0.01 to 4.6 GHz
-  Power output: to 10 dBm
-  Direct analog synthesis using 10 MHz source
-  Improved reliability

96740021-05
Frequency Synthesizer
- Front panel controls or BCD remote operation
- Frequency hopping:  < 200 ns
- Frequency range:  0.01 to 3.0 GHz
- Power output:  to 10 dBm
- Direct analog synthesis using 10 MHz source
- Improved reliability

96740022-03
Power Amplifier
-  Frequency range: 0.85 to 1.45 GHz
-  Power output: 100 W (50 dBm) min.
-  Input power: 1 mW (0 dBm) max.
-  Input VSWR: 2:1
-  Output VSWR: 1.3:1
-  Harmonics suppression: -30 dBc
-  Spurious suppression: -60 dBc

L9668-111-020-17
Data Acquisition and Control Mainframe