CORE ANALOG/DIGITAL
STANDARD
CONFIGURATION:
• PC
- Removable Hard Drive
- DVD R/W
- Keyboard/Mouse
- 19 Inch Display
• Power Distribution Unit/
Frequency Standard
• Printer

---

VIDEO TESTING
• Supports NTSC, PAL, RS-170,
343, et. al.
• Composite Video Generator
• Raster Video Generator
• Stroke Video Generator
• Video Capture/Recorder

---

INTEGRATED SWITCHING
• 400 Universal I/O Points
(>100 MHz BW)
• 50 Universal I/O Paths
(>3 GHz BW)
• 6.5 Digit DMM
• 2 Counter-Timer Channels
• 4 Digitizing O-Scope Channels
• 4 Analog Source Channels

---

DIGITAL TESTING
• 32 Discrete I/O
• 128 Dynamic I/O

---

SOFTWARE/ENVIRONMENT
• TCASE™ Runtime
• TBASIC™ Diagnostic Selftest
• NI-VISA™

---

CORE RF STANDARD CONFIGURATION:
• Microwave Sources
- 3 Discrete Instruments
(to 22 GHz)
- FM, AM, PM Modulation
- Switched Outputs: 12
- +17 dbm Maximum Power
• 1 Hz Resolution
• 10 MHz to >20 GHz

---

SPECTRUM ANALYZER
• 100 KHz to 26.5 GHz
• +20 dbm Maximum Power
• DANL (0 dBm input atten.,
10 Hz Res BW)
<2.9 Ghz –156 dBm
<12.86 Ghz –153 dBm
<26.56 Ghz –150 dBm
• Switch Inputs: 12

---

VECTOR NETWORK ANALYZER
• >50 MHz <27 GHz
(100 dB range)
• +30 dBm Maximum Input
• 511 & 521 Support
• Directivity: 42 dB to 36 dB
• Source Match: 37 dB to 28 dB
• Load Match: 42 dB to 36 dB
• Non Switched

---

DIGITIZING OSCILLOSCOPE
• 20 MSa/Second
• 4 Discrete Channels/Triggers
• 10 Bit Amplitude Resolution
• Switched Inputs: 12

---

POWER METER
• Two Channel/Head
• Range: 50dB in 10 dB Steps
100 KHz to >27 GHz
• Average and Peak
• Switched Inputs: 12

---

RF/MICROWAVE INTEGRATED SWITCHING
• 12 Input
• 12 Output
• Maximum Freq.: <26 GHz
• Maximum Power: 1 Watt
• Integrated Support
(TPS Programmable)
- Attenuators
- Down Conversion
- Filtering
- Frequency Discrimination
- Log Amplification/Detection
- VSWR
- Sources
• >50 Defined Calibration Paths

RACK STYLE	VIDEO TESTING
Vertical (standard)	Add Video Testing
Benchtop	Add Digital Video Stim/Capture I/O
Transit Case	Add Video Capture/Re-Display Software
Private Labeling Required	Add Video Analysis Software
	Add Scripted Video Standards Software
INTERFACE
ZIF Connectors (standard)	DISCRETE SWITCHING
IEEE-1505 Patch	Form-C 5 Amp Relays (32) (standard)
	Remove Discrete Switch
AC POWER SUPPLY	Add 16
3 Phase (standard)	Add 32
Remove 3 Phase AC
Add Single Phase AC 200W	DIGITAL TESTING
Add Single Phase AC 450W	Increase I/O Count (specify):
	Add LASAR Fault Dictionary Software
DC POWER SUPPLY	Add LASAR Guided Probe Software
8 Channels (standard)	Add LASAR Post Processor
Remove up to 2 Channels (specify):
Add up to 4 Channels (specify):	SERIAL & BUS COMMUNICATIONS
	MIL-STD-1553 (standard)
SYNCHRO RESOLVER	Remove MIL-STD-1553 Bus
Input & Output Channel (standard)	Add MIL-STD-1760
Remove Synchro Resolver	Add ARINC (429 or 708)
Add up to 5 Input Channels (specify):	Add Serial (RS 232/422/485)
Add up to 5 Output Channels (specify):	Add IEEE-488
	Add IEEE-1394B
WAVEFORM GENERATORS
3 Channels (standard)	SOFTWARE DEVELOPMENT KITS
Remove 3rd Channel	Add Software Development Kits
Add 4th Channel	Number of Users:
	If an option you require is not shown, please contact ATTI.
OPTIONS- CORE ANALOG/DIGITAL + RF/MICROWAVE TEST SYSTEM CORE RF/MICROWAVE TEST SYSTEM
RACK STYLE	DIGITIZING OSCILLOSCOPE
Vertical (standard)	4 Channel 20MSa/Second (standard)
Benchtop	Increase Channels
Transit Case	Increase BW
Private Labeling Required	Remove
	Replace Vendor (Name):
INTERFACE
N-Type (standard)	POWER METER
Patch	2 Channel (standard)
User Defined	Increase Channels
	Remove
DISCRETE SWITCHING	Replace Vendor (Name):
Add Switches
Define Number:	FREQUENCY COUNTER
*Define Type:	None (standard)
*Custom Description To Be Supplied	Add Channel
	Specify Vendor (Name):
MICROWAVE SOURCE OPTIONS
Concurrent Channel: 3 (standard)	SCALAR ANALYZER
Remove Channel:	Not Installed (standard)
Add Channel:	Add Capability
Replace Vendor (Name):	Specify Vendor (Name):
Remove Modulation
	UPCONVERTER/DOWNCONVERTER
SPECTRUM/ANALYZER OPTIONS	Not Installed (standard)
Specan to <27 GHz (standard)	Add Capability
Increase BW To:	Specify Vendor (Name):
Decrease BW To:	Specify Frequency Range:
Replace Vendor (Name):
	If an option you require is not shown, please contact ATTI.
VECTOR NETWORK ANALYZER
Network Analysis to <27 GHz (standard)
Increase BW To:
Decrease BW To:
Remove
Please fill in form below to complete custom test station configuration *Indicates required field. First Name: Last Name: *E-Mail Address: Company Name: Department: Address: City: State: Alabama Alaska Arizona Arkansas California Colorado Connecticut Delaware Florida Georgia Hawaii Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana Maine Maryland Massachusetts Michigan Minnesota Mississippi Missouri Montana Nebraska Nevada New Hampshire New Jersey New Mexico New York North Carolina North Dakota Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Vermont Virginia Washington West Virginia Wisconsin Wyoming ZIP/Postal Code: Country: *Phone: Extension: Fax: Position: Industry: Product Interest(s):
Click to Clear All Selections and Start Over
Click to Submit Form and Request Quote
TCASE™ and TBASIC™ are trademarks of ISC Systems, Incorporated. NI-VISA™ is a trademark of National Instruments Corporation. LABWindows™ is used under licence from Microsoft Corporation.