Products - IEEE-488
01000511-01
Modulation Meter
- Frequency range: 100 KHz to 2.5 GHz
- Measures AM/FM/ØM
- Measures carrier frequency, level, audio frequency, and distortion/ SINAD
- Peak, RMS, quasi-peak detection
- Audio frequency output
- GPIB programmable
01000513-01
Audio Analyzer
- Frequency range: 10 Hz to 200 KHz
- Measures frequency, distortion, SINAD, S/N
- Measurement level of 300 µV to 300 V
- Built-in audio source for stimulus-response applications
- GPIB programmable
01000514-01
Signal Generator
- Frequency range: 9 KHz to 2.51 GHz
- Power: -140 to +13 dBm
- Modulation: AM, FM,ØM, pulse, FSK
- Internal modulation generator
- GPIB programmable
01000515-01
Fast Switching Signal Generator
- Frequency range: 1 MHz to 1600 MHz
- Power: +3 to +13 dBm
- Frequency switching: 20 µs max.
- Low phase noise
- BCD programmable
02000136-01
RF Pulse Amplifier
- 1000 W pulse
- Gain >/= 60 dB
- Input power </= 10 dBm
- Harmonics </= 60 dBC
- 30% max. duty cycle
02000259-01
Programmable DC Electronic Load
- 4000 W DC load
- Constant current mode
- Constant voltage mode
- Constant power mode
- Constant resistance mode
- 500 Vdc max. voltage
92103573-01
Single-Phase AC Programmable Power Supply
- AC supply 350 VA
- Frequency:
- Range: 0 to 5 KHz
- Resolution: 1 Hz
- Amplitude (350 VA max.):
- Range: 0 to 260 Vac
- Resolution: 0.1 Vac
92103598-01
IEEE Card
- Standard IEEE-488.2 interface
92105229-01
IEEE Card Upgrade
- Replaces existing IEEE card as a result of Windows™ upgrade
- Includes removal of old card and installation of new card
- Requires P/N 3105SU-1, or P/N 3105SU-2, or P/N 3105SU-3
93000069-01
A/B to C-Size Module Carrier
93000550-30
Three-Phase AC Programmable Power Supply
- Range: 0 to 312 Vac
- Frequency: DC 5 KHz
- Rack mountable
- Power Factor Correction option available
93000550-50
Three-Phase AC Programmable Power Supply with Power Factor Correction
- Range: 0 to 312 Vac
- Frequency: DC 5 KHz
- Rack mountable
- Input power factor corrects to better than 0.99
94000855-01
Microwave Signal Generator
- Frequency:
- Range: 10 MHz to 18 GHz
- Resolution: 0.1 Hz
- +10 to -120 dBm amplitude range
- Excellent spectrum purity
- Modulation capabilities (pulse, AM, FM)
- Rack mountable
94000887-01
DC Power Supply Frame
- Rack mountable
- Can hold up to 6 DC modules, any combination
(94000888-01, 94000889-01, 94000890-01, 94000891-01, 95000042-01,
95000043-01, 95000044-01, 95000045-01)
94000888-01
0 to 7 V Module for DC Power Supply
- 15 A max.
- 105 W
- For use in 94000887-01
94000889-01
0 to 20 V Module for DC Power Supply
- 10 A max.
- 200 W
- For use in 94000887-01
94000890-01
0 to 32 V Module for DC Power Supply
- 6.25 A max.
- 200 W
- For use in 94000887-01
94000891-01
0 to 320 V Module for DC Power Supply
- 0.625 A max.
- 200 W
- For use in 94000887-01
94000967-01
Vector Signal Generator
- High-performance, versatile modulation source
- Analog phase modulation for telemetry signals
- BPSK, QPSK, 8PSK, 16QAM, digital modulation, and pulse
- Direct-sequence spread spectrum modulation with chip widths to 7 ns
- Wide-band FM: over 200 MHz p-p deviations
- 700 MHz modulation bandwidth using I/Q or vector
- 10 MHz to 3 GHz IF testing
- Pulse modulation with 1-ns rise times
- Coherent carrier output
- Rack mountable
94000968-01
Vector Signal Analyzer
- High-performance spectrum analysis
- Advanced, optimized time-gated spectrum analysis
- Precision digital AM, FM, PM demodulation
- Narrow-band spectrum speed to 60 updates/s
- Simultaneous time and frequency measurement
- High resolution, high accuracy time domain
- Rack mountable
94000969-01
Agile Signal Generator
- 252 KHz to 1030 MHz frequency range
- 15 ms frequency switching
- Stand-alone control of frequency agility
- Specified performance while fast hopping
- FM rates to 10 MHz, deviations to 20 MHz
- Low spurious and phase noise
- Rack mountable
94001241-01
IEEE Programmable Electronic Load (2.5 KW)
- Maximum power: 2500 W continuous
- Voltage range: 10 to 400 Vdc
- Resistance range: V/I programmable
94100508-01
Dual High Current AC Power Supply
- Programmable single or three phase output
- 0 to 312 V rms Line to Neutral
- 26 A at 270 V per phase
- DC or 40 Hz to 5 KHz
94101177-01
136-Channel Logic Analyzer
- Channel count: 136
- Timing analysis speed: 250 MHz
- State analysis speed: 150 MHz
- Memory depth: 2 M
95000010-01
Traveling Wave Tube Amplifier
- 8 to 12.4 GHz
- 40 dB minimum gain
- +43 dBm (20 watts) minimum output power
- Rack mountable
95000011-01
High-Performance Signal Generator
- 100 KHz to 1.0575 GHz
- 1 Hz resolution
- -140 to +20 dBm output power
- Phase, amplitude, frequency, and pulse modulation
- Rack mountable
95000012-01
Spectrum Analyzer
- 100 Hz to 1.5 GHz
- -135 to +30 dBm
- 20 ms to 1500 s sweep times
- Rack mountable
95000013-01
Frequency Counter
- DC to 1.3 GHz
- 100 mV to 1 V rms dynamic range
- ±5 Vdc max.
- Rack mountable
95000017-01
RF Network Analyzer
- 0.1 to 500 MHz
- Integrated source
- Full accuracy enhancement
- Transmission and reflection measurements (amplitude and
phase) performed
- Rack mountable
95000018-03
Microwave Network Analyzer
- 50 MHz to 20 GHz
- Integrated source
- Full accuracy enhancement
- Transmission and reflection measurements (amplitude and
phase) performed
- Time domain capability
- Rack mountable
- Frequency offset mode
- Calibration kit
95000042-01
0 to 10 V Module for DC Power Supply
- 12 A max.
- 120 W
- For use in 94000887-01
95000043-01
0 to 40 V Module for DC Power Supply
- 5 A max.
- 200 W
- For use in 94000887-01
95000044-01
0 to 80 V Module for DC Power Supply
- 2.5 A max.
- 200 W
- For use in 94000887-01
95000045-01
0 to 160 V Module for DC Power Supply
- 1.25 A max.
- 200 W
- For use in 94000887-01
95000450-10
Auxiliary RF Signal Processor/Matrix
- Switching and attenuation DC to 18 GHz
- HF synthesis, low noise target generator (optional), and
amplification
95000450-50
Auxiliary RF Signal Processor/Matrix
- Switching and attenuation DC to 18 GHz
- HF synthesis, low noise target generator, and amplification
95000524-10
Phase Noise Measurement Drawer
- Measures phase noise at frequencies between 150 MHz (VHF) and 10.5 GHz (X band)
- Measures AM noise at frequencies between 150 MHz and 10.5 GHz
- Generates low noise signal outputs between 10 MHz and 10.5 GHz
- Provides signal switching, downconversion, amplification
- Unit is housed in a rack-mountable drawer
95001000-10
Target Generator/Dual-HF Synthesizer,
Including Virtual Spectrum Analyzer Software Utility
- Provides stable low spurious, highly stable programmable waveforms, and triggering
functions
- Provides additional dual-HF synthesizer capability
96000020-01
Programmable Electronic Load
- Maximum power: 300 W continuous
- Voltage range: 3 to 120 V (selectable)
- Resistance range: 0.01 to 1 KOhm
96000021-01
1 KW Programmable Power Supply
- 0 to 33 Vdc @ 33 A max.
- Load, line resolution: 33 mV, 33 mA
- Programming resolution: voltage, current: 0.03% F.S.
- Programming accuracy:
- voltage: ±0.05% + 0.4% of VOUT max.
- current: ±0.01% + 0.4% of IOUT max.
96000022-01
Programmable Load Power Supply
- 60 V/60 A or 120 V/30 A
- Constant current mode accuracy
- Constant low current range
- Constant voltage mode accuracy
- Constant resistance mode
- Current pulse mode
- Voltage pulse mode
- Resistance pulse mode
- Remote sensing
96740017-05
Peak Power Meter
- High resolution color display
- Front panel menu or IEEE remote operation
- Pulsed RF measurements from -24 to +20 dBm
- CW measurements from -34 to +20 dBm
- Balanced diode sensing for even-order harmonic suppression
- 1 MHz sampling rate
- 1 GHz internal calibrator
96740017-07
Dual-Channel Peak Power Meter
- CW and pulsed RF signals
- Peak and average power
- 500 MHz to 18 GHz
- -40 to +20 dBm (pulsed)
- -50 to +20 dBm (CW)
96740019-01
Peak Power Sensor
- Frequency range: 0.5 to 18 GHz
- Power measurement: -40 to +20 dBm
- Risetimes: < 100 ns
- VSWR: 1.15:1
96740019-03
Peak Power Sensor
- Frequency range: 0.5 to 18 GHz
- Power measurement: -50 to +20 dBm
- Risetimes: < 100 ns
- VSWR: 1.15:1
96740021-01
Frequency Synthesizer
- Front panel controls or BCD remote operation
- Frequency hopping: < 1 µs
- Frequency range: 0.01 to 4.6 GHz
- Power output: to 10 dBm
- Direct analog synthesis using 10 MHz source
96740021-03
Upgraded Frequency Synthesizer
- Front panel controls or BCD remote operation
- Frequency hopping: < 1 µs
- Frequency range: 0.01 to 4.6 GHz
- Power output: to 10 dBm
- Direct analog synthesis using 10 MHz source
- Improved reliability
96740022-03
Power Amplifier
- Frequency range: 0.85 to 1.45 GHz
- Power output: 100 W (50 dBm) min.
- Input power: 1 mW (0 dBm) max.
- Input VSWR: 2:1
- Output VSWR: 1.3:1
- Harmonics suppression: -30 dBc
- Spurious suppression: -60 dBc