The BRAT®
B509
POWER SUPPLY TEST SYSTEM
The BRAT® B509 is a double rack, stand-alone, high
voltage, high power test system utilizing Commercial-Off-The-Shelf
(COTS) equipment in a modular design. Its primary use is as Automatic
Test Equipment (ATE) for power supplies with a wide range of input
and output requirements. Easy access to all of the modules as
well as room for expansion/reconfiguring are allowed by the physical
reconfigurable assembly. The tester includes 7 programmable DC
power supplies with outputs ranging from 40 V to 1 KV, 14 programmable
loads from 300 W up to 750 W, a 4-channel, 500 MHz oscilloscope,
and DMM with high voltage probe capabilities up to 12 KV. The
quick disconnect, high density interface includes high current
loading capabilities at 50 A per pin and dedicated pins for general
purpose switching.
Specifications
7 Programmable DC Power Supplies
· 0 to 40 Vdc @ 25 A (Qty 2)
· 0 to 150 Vdc @ 7 A (Qty 2)
· 0 to 600 Vdc @ 1.7 A (Qty 2)
· 0 to 1000 Vdc @ 0.2 A (Qty 1)
Three-Phase AC Power Supply
· 350 Vac @ 13 A (Qty 1)
Programmable Loads
· 60 A, 60 V, 300 W Modules (Qty 6)
· 30 A, 120 V, 300 W Modules (Qty 6)
· 15 A, 400 V, 750 W Modules (Qty 2)
High Voltage Digital Multimeter
· 1.2 KV ´1 Atten Input
12 KV ´10 Atten (Qty 1)
Digitizing Oscilloscope
· Bandwidth: 500 MHz
· Channels: 4
· Maximum Input Voltage: ±400 V
Options Available for the BRAT® B509
· High Power RF
· Cooling Forced Air
· Additional DC Power
· Additional Loading
B509